Safety Helmet Hat

Pay attention to the principle

1. Before wearing, check whether the accessories of the helmet are damaged, whether the assembly is firm, whether the adjustment part of the cap lining is locked, whether the socket is firm, whether the rope is fastened, etc. If the distance between the cap lining and the cap shell is not 25 Between ~50mm, use the top rope to adjust to the specified range. Make sure all parts are in good condition before use.
2. According to the size of the user's head, adjust the length of the cap hoop to an appropriate position (appropriate tightness). The helmets worn by high-altitude workers must have a chin strap and a back neck cuff and be fastened to prevent the hat from slipping and taking off.
3. After the helmet is subjected to a large impact during use, no matter whether the cap shell is found to have obvious cracks or deformation, it should be stopped and the damaged helmet should be replaced. Generally, the use period of helmets does not exceed three years.
4. Helmets should not be stored in places with acid and alkali, high temperature (above 50°C), direct sunlight, humidity, etc., to avoid heavy objects or sharp objects.
5. The cap shell and cap lining can be washed with cold water and warm water (below 50℃). Do not bake on a radiator to prevent deformation of the cap shell.